4T2-Rack Receiver
4T2-Rack receiver
The 4T2-Rack receiver monitoring instrument is the off-air variant of the 4T2-Rack demodulator. The systems are offering 4 slots that can be equipped with any combination of measurement hardware based on XTASI modules. Each input is analysed by one instance of the 4T2 Content-Analyser. Remote Control is achieved by implementing the DVB-SNMP interface to ensure seamless operation with third party network management software. The instruments are prepared to be integrated into a network with a Gbit-ethernet interface. Relay contacts are available for local alarming.
4T2-Portable, 4T2-Portable light, 4T2-Rack demodulator, 4T2-Rack receiver, XTASI, 4T2 Content-Analyser Application, 4T2 RF-Analyser Application
Portable Spectrum Analyzers
PSA-2500C
The PSA-2500C was designed for the Field Engineer to have a very useful, compact tool that eliminates the need for carrying around a big bulky bench-top unit. The PSA-2500C has the option to have dual switching inputs so that you can easily setup cross pole or monitor 2 different feeds simultaneously. The new PSA-2500C was designed for excellent frequency and amplitude accuracy with a wide variety of resolution bandwidth selections ranging from 10KHz to 1MHz.
PSA-2500C, PSA 2150C
Rack Mount Spectrum Analyzers
RSA-6500A
The RSA-6500A offers a wide range of frequency coverage including HF, VHF, UHF, L, S, and C Bands. C-Band, S-Band uplink/downlink and IF frequencies can be monitored with a single unit with additional inputs for other applications. Visit any teleport and there is a good chance you will see an AVCOM Of Virginia RSA Spectrum Analyzer operating in the rack.
RSA-1100B, RSA-2150B, RSA-2500B
OEM Spectrum Analyzer Cards
RSA-2500B-SBS
The RSA-2500B-SBS is the latest Avcom product designed from the ground up with the system integrator in mind. The compact design measures 5″” x 7″” so that it can easily be integrated into another piece of equipment, inside a small satellite terminal, or as an integral part of the satellite antenna itself. The single board design requires only external +15-24VDC/9W and a wideband input signal (950 MHZ to 2150 MHz) and is available with USB, Ethernet, and Serial communication ports.
RSA-1100B, RSA-2150B, RSA-2500B
4T2-Portable
4T2-Portable
The system combines real-time measurements of RF modulation parameters (COFDM, 8VSB) with MPEG transport stream analyser functions in a robust and easy to carry instrument. The 4T2TM 2012 release integrates the latest processing platform with a 15.4″” 1400×900 screen, i7 quad-core processor, and SATA-3 SSD. All programs in the transport stream are decoded at the same time by the 4T2TM-Content-Analyser. This includes MPEG-4 H.264 high definition video material.
4T2-Portable, 4T2-Portable light, 4T2-Rack demodulator, 4T2-Rack receiver, XTASI, 4T2 Content-Analyser Application, 4T2 RF-Analyser Application
4T2-Portable light
4T2-Portable light
DVB-T2 MI analyser on ASI or on IP input – Transport Stream analyser with Multi-Viewer – SI-Tree, SI-table repetition, TR.101.290 1st, 2nd, 3rd priorities, Services & PIDs display, Data-rates display & graph, PCR-rate & Jitter, H.264 HD decoder, Black/Freeze detector, Audio mute, triggered capture, log-file – DVB-T/T2 RF analyser with Level, MER, EVM, bit errors Constellation display, Impulse Response display, Spectrum display, DVB-S/S2 RF analyser with Level, SNR, bit errors.
4T2-Portable, 4T2-Portable light, 4T2-Rack demodulator, 4T2-Rack receiver, XTASI, 4T2 Content-Analyser Application, 4T2 RF-Analyser Application
4T2-Rack demodulator
4T2-Rack demodulator
The 4T2-Rack demodulator transmitter monitoring instrument is the latest generation of terrestrial measurement systems (DVB-T/T2, ATSC), combining comprehensive real-time monitoring of RF-parameters, and transport stream sources at the same time. The system utilises ABC’s unique hybrid demodulator technology, designed for better than 40dB MER measurement performance at the output of a transmitter.
4T2-Portable, 4T2-Portable light, 4T2-Rack demodulator, 4T2-Rack receiver, XTASI, 4T2 Content-Analyser Application, 4T2 RF-Analyser Application
XTASI
XTASI
ABC XTASI are USB-powered modules to turn a laptop-, or tablet computer into an economic broadcast measurement system. The XTASI family consists of DVB-T/-T2 RF input, DVB-ASI input, and DVB-ASI output modules. Powered through USB 2.0 interface, machined, anodised aluminium housing (lifetime warranty), low weight, small form factor (100 · 16 · 42) mm.
4T2-Portable, 4T2-Portable light, 4T2-Rack demodulator, 4T2-Rack receiver, XTASI, 4T2 Content-Analyser Application, 4T2 RF-Analyser Application
Content Analyser
4T2 Content-Analyser Application
Professional analyser for MPEG Transport Streams (MPEG-TS) with DVB-T/T2, DVB-S/S2, T2-MI, or ATSC extensions.
4T2-Portable, 4T2-Portable light, 4T2-Rack demodulator, 4T2-Rack receiver, XTASI, 4T2 Content-Analyser Application, 4T2 RF-Analyser Application
RF Analyser
4T2 RF-Analyser Application
Provides DVB-T2, DVB-T, ATSC modulation analysis with Constellation, MER, and EVM vs Carrier displays.TPS analysis covering mode, FFT length, spectrum orentation, bit-rates, and Cell-ID with Bit Error Rates with Level and MER data logging. Spectrum and Impulse Response analysis with mask and marker support. Group Delay analysis with mask and marker support. Allows Impulse Response analysis with SFN transmitter power & frequency-offset measurements. Coverage analysis of up to 3 channels with logging of GPS coordinates and map display.
4T2-Portable, 4T2-Portable light, 4T2-Rack demodulator, 4T2-Rack receiver, XTASI, 4T2 Content-Analyser Application, 4T2 RF-Analyser Application
Splitter / Dividers
L-band Splitter / L-band Divider – Active
The ETL L-band Splitter or L-band Divider is available in a range of capacities. The most common are 4,8, and 16-ways but larger L-band splitters to 32 or even larger capacities are available. We produce active splitters (also known as L-band Distribution Amplifiers) and passive splitters. In general the active L-band splitters are unity gain but some (especially 4-ways) may be made with more gain. Dual redundant amplifiers and amplifier current monitoring are also available for more mission critical applications.
L-band Splitter / L-band Divider – Active, L-band Splitter / L-band Divider – Passive, IF Splitter / IF Divider – Active, C-band Splitter / C-band Divider – Active, C-band Splitter / C-band Divider – Passive, VHF Splitter / VHF Divider – Active, VHF Splitter / VHF Divider – Passive
DVB-T Monitoring / DTT Monitoring
FlexMon DVB-T Monitoring Receiver
The FlexMon DVB-T Monitoring Digital Terrestrial Monitoring Receiver is the central part of the monitoring system. This unit receives and controls all data coming through the different unit inputs. Depending on your needs and your network set-up various input and output interfaces can be involved in the flexible monitoring strategies. In general all monitoring activities can be founded on two different sources. Transmitter RF-output, by using the internal DVB-T receivers and ASI Input stream, from distribution network to the transmitter.
DVB-T Monitoring, DTT Monitoring