• Frequency range 17.3-22.2 GHz
• Several LO frequencies available
• Internal or external 10 MHz reference
• Low phase noise (DVB-S2X compliant)
• High P1dB and IP3 out RF via Fiber receiver
• Compact size and light weight
• High operating temperature range
The iNetVu® 7710 Controller is a simple stand-alone one touch operation to find satellite & stow antenna. Ideal for applications that require a quick, simple setup and reliable connection. Only works with iNetVu® mobile platforms which are equipped with 7720 on-board module such as the FLY-75V.
7000, 7024, 3000, 3024
The iNetVu® Ka-75V Drive-Away Antenna is a 75 cm auto-acquire satellite antenna system designed for use with ViaSat modems.
It can be mounted on the roof of a vehicle for direct broadband access over any configured satellite.
The system works seamlessly with the iNetVu® 7024 Controller providing fast satellite acquisition within minutes, anywhere anytime.
“Approved for use on ExedeSM Ka Service by VIASAT and on KA-SAT NEWSSPOTTER NEWSGATHERING service by Eutelsat”
Ka-98G, Ka-98H, Ka-98V, Ka-981, Ka-1201, Ka-1202, Ka-1202V, Ka-1202G, Ka-1501, Ka-1801(soon), Ka-980
The NEW iNetVu® FLY-75V Flyaway Antenna is a 75 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere.
It can be assembled in 10 minutes by one person.
FLY-98G, FLY-98H, FLY-98V, FLY-981, ACFLY-1200, FLY-1201
The iNetVu® 120 Fixed Motorized Antenna system is a self-pointing auto-acquire unit that can be mounted either as a permanent installation or on a portable fixed base. The antenna works seamlessly with the iNetVu® 7024C Controller. The FMA-120 system is easily configured to provide instant access to satellite communications for any application that requires reliable and/ or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster Management, Construction, Mobile Offices, Emergency Services, Cellular Backhaul and many others.
2500-G Series 50W Ku-Band GaN (Gallium Nitride) based Airborne Grade SSPB/BUC designed to meet stringent commercial airborne requirements and specifications. The new Airborne Grade Ku-Band GaN based SSPBs/BUCs provide high power density in a compact size and are suitable for use in the rapidly growing market for in-flight connectivity and satellite mobility services.
The Newtec MDM5000 Satellite Modem is capable of receiving forward carriers of up to 140 MHz, and processing over 200 Mbps of throughput. On the return channel, it supports SCPC, TDMA and Newtec’s unique Mx-DMA™, up to 75 Mbps.
MCX7000, MDM2200, MDM2500, MDM3300, MDM5000
Compatible with the Newtec Dialog® multiservice broadcast platform, the Newtec MCX7000 Multi-Carrier Satellite Gateway also features multistream, Newtec’s efficiency-boosting Clean Channel Technology® and Equalink® 3, a new linear and non-linear pre-distortion technology designed to compensate for the effects of distortions caused by the satellite’s filters and amplifiers. The additional throughput this provides equates to up to 15 percent more TV channels in a DTH carrier.
MDM2200, MDM2500, MDM3100, MDM3300, MDM6000, MDM6100, EL470, EL478
The Newtec Dialog® platform is a scalable and flexible multiservice satellite communications platform that allows satellite service providers to build and adapt their network easily as their business grows.
Network Management System, SATlink Manager, File Exchange Manager
The New Engage Class Advantech Wireless High Performance, 1.2m Flyaway VSAT Terminal Solution includes the most advanced SATCOM technology available today.
The terminal is based on a high efficiency, ruggedized tri band ready 1.2 Meter Motorized Antenna, which can cover X-band, Ku-Band, or Ka-Band, by replacing the feed only. The antenna is fully motorized and has integrated satellite finding controller. The terminal has been built in a unique triple access mode satellite modem based on the new Adaptive Satellite Access Technology (A-SAT-IITM).
VR-7400, S-6620 & S-5620 VSAT Terminals, ManPack Terminal, N-4120 DVB-RCS VSAT Terminal, S-6740 A-SAT Mesh Terminal, GPS-100P NTP Server
The SSPBg-210C series is hub-mount up-converter transmitters, using GaN Technology, operating in the C-Band. The SSPBg-210C is an integrated unit, complete with power supply, phase-locked oscillator, mixer, filter and cooling mechanism. Intended for outdoor operation, the SSPBg-210C provides the utmost in convenience and efficiency. Other SSPBs are also available for higher powers or for operation at other up-link frequencies. The hub-mount SSPBg-210C is constructed in a compact cooling enclosure for outdoor operation. The units are weatherproof.
C-Band Indoor GaN, Ku-Band Indoor GaN, X-Band Indoor GaN, Outdoor GaN, C-Band Outdoor GaN, DBS-Band Outdoor GaN, Ku-Band Outdoor GaN, X-Band Outdoor GaN
The HP range of frequency converters is particularly suited for use in VSAT, SCPC Networks, SNG, DVB-RCS and Hub systems were compact redundancy is required. This makes them an ideal choice for large earth stations requiring cost effective solutions for frequency conversion. The lightweight, rugged and compact design also ensures that the HP frequency converter provides the ideal solution for mobile truck or flyaway DSNG systems.
C-Band Block Converters, Outdoor Block Converters (C, Ka, Ku, X-Band), Outdoor Synthesised Converters (S, L-Band)
EL830 PEP-Box Gateway
The EL830 PEP-Box® Gateway is a Performance Enhancing Proxy (PEP) appliance that combines a number of advanced traffic enhancement and shaping functionalities for the end points of point-to-point and point-to-multipoint satellite IP networks.
EL830, EL838, EL840, EL848
Developed with high care by a team of experienced engineers, manufactured on our own high quality production line and heavily tested, Newtec OEM boards are reliable high end products specifically designed to satisfy demanding Satcom manufacturer requirements.
NTC/3475.AB OEM L-Band to IF Frequency Converter, NTC/7029.AA OEM Satellite IF Modulator Board, NTC/7044.BB OEM Satellite Demodulator Board, NTC/7072.AB OEM Satellite Demodulator Board, NTC/7139 OEM Satellite L-band Modulator Board
KU-BAND PLL HS1000 SERIES
Norsat’s Low Noise Blocks (LNBs) provide signal reception for satellite communication around the world. Norsat LNBs feature the industry’s best LO (Local Oscillator) stability. They feature high performance for any application.
KU-BAND PLL HS1000, Ext Ref Compact 1000XH, DUO 9000HX-O3B, Ext Ref 9000X, Dual-Band 9000X-3, Dual-Band 9000H-3
MN421 Low Bandwidth Fast News Gathering TV – Ku Band – The MN421 Low Bandwidth Fast News Gathering TV Satellite Interactive Terminal is a Ku band terminal which can be used in conjunction with the Multiservice Broadcast solution for fully automated low resolution Video Fast News Gathering.
MN410, MN411, MN420, MN421, MN426, MN510, MN520, MN813, MULTISERVICE BROADCAST PLATFORM
The lightest flyaway antenna in the Mantis range, at less than 23kg, is the Mantis 100 which comfortably meets airline check-in allowances. Yet its rugged, weatherproof construction and easy integration with Vislink 5000 series electronics means it sets the standard for versatile video and IP data uplinks.
Mantis-100, Mantis-120, Mantis-190, Mantis-240, MSAT, Motorised MSAT
The NewSwift HD motorised antenna system is a highly compact, lightweight, integrated vehicle mountable satellite terminal designed for rapid deployment. Featuring a specially shaped offset fed antenna manufactured in carbon fibre, the NewSwift HD equipment housing (or Pod) is able to house redundant 750W TWTAs, Phase combined 400W TWTAs or redundant/phase combined 300W C Band or 125W Ku Band SSPAs
Newswift CF1.2, Newswift CF1.5, Newswift CF1.8, Newswift HD1.5, Newswift HD1.8, Newswift LT1.2 KU Band
The XVE9310 Dual Channel Encoder provides advanced features of Ancillary Data transmission or High Efficiency Video Mode on each channel in addition to the features available on XVE9300. XVE9310 can transmit full 3D videos or full HD dual channel videos with built-in TS-MUX. 4K contribution is also possible by cascade connection of two XVE9310.
XVE9310, HVE9230, SARA LSI
The AFD120 FlyDrive 1.2m antenna is a compact, lightweight, fully motorised, auto acquisition capable satellite terminal designed for rapid deployment. It can be used either as a traditional flyaway or as a semi-permanent vehicle mounted terminal that can be fitted to longitudinal roof bars or most other roof racks using standard fittings. The AFD120 antenna fits into just two IATA weight-compliant cases.
Man Portable Data Terminal
The Advent Mantis MSAT Man Portable Data Terminal is a highly portable tri-band satellite antenna system designed for rapid deployment in hostile environments. Available with either a 65 or 90cm reflector its small size and weight make it ideal for secure and non-secure satellite communications for a variety of applications
MSAT, Motorised MSAT
XTS-200C AC-Powered C-Band Amplifier, 53dBm Output Power
The XTS-200C high power solid state power amplifiers are compact, fully integrated antenna-mount units designed for low cost operation and longevity. Intended for outdoor operation, the XTS-200C eliminates the need for a separate amplifier shelter. In addition, the distance between the amplifier and the antenna feed can be shorter, thus eliminating long waveguide runs and associated RF losses.
XTS-25C, XTS-50C, XTS-100C, XTS-200C, XTS-100X, XTSLIN-100X, XTS-25K, XTS-50K, XTS-60K, XTS-100K1
HD&SD IP Capable ExciterAdvent’s established lightweight, compact, 1U half rack electronics packages are ideally suited for flyaway or vehicle mounted solutions, where weight and space are at a premium. The 5000 series of electronics can be packaged in different lightweight, ruggedised canvas flight cases, depending on units selected and system configuration.
XTS-8K-B1 DC-Powered Ku-Band Amplifier, 39dBm Output Power
The XTS-8K-B1 High Power Solid State Block Upconverters (BUC) are a series of compact, fully integrated antenna mount units designed for low cost operation and longevity. The L-Band input interfaces to standard modems operating in the 950 – 1700 MHz range. Intended for outdoor operation, the XTS-8K-B1 eliminates the need for a separate shelter. The construction and light weight allows for direct mount to the antenna. This eliminates long waveguide runs and associated RF losses.
XTS-50X-B1, XTS-25K-B1, XTS-40K-B1, XTS-40KHE-B1, XTS-20KaL-B1
XTD-200K Antenna-Mount TWTA, Ku-Band, 200W
The XTD-200K is a compact, antenna mountable, traveling wave tube amplifier designed for low cost installation and long life. Intended for outdoor operation, the self contained XTD-200K eliminates the need for a separate amplifier shelter. In addition, the distance between the amplifier and the antenna feed horn can be short, thus eliminating long waveguide runs and their associated RF losses.
XTD-400C, XTD-750C, XTD-150X, XTD-400X, XTD-750X, XTD-200K, XTD-400KHE, XTD-400K, XTD-750KHE, XTD-750K, XTD-1250KHE, XTD-2500KHE, XTD-50DBS, XTD-270DBS, XTD-500DBS, XTD-750DBS, XTD-150Ka, XTD-175Ka, XTD-250Ka, XTD-500Ka, XTLIN-25/50/75, XTLIN 25/50/75/100+
The XTK-2000K, XTK-2000K1, XTK-2000K2, and XTK-2000K3 are compact Klystron Power Amplifiers (KPAs) designed for fixed and mobile uplink applications. Xicom KPAs are ½ the height of conventional KPAs. Reduced height is complimented by reduced weight. Shipping is greatly simplified as the RF deck, klystron tube, and power supply are shipped individually and weigh 100 pounds each.
XTK-3000C, XTK-3000C2, XTK-2000K, XTK-2000K1, XTK-2000K2, XTK-2000K3, XTK-1400DBS, XTK-2000DBS
FlexDSR02/04+ DVB Satellite Receiver
The FlexDSR+ is based on a flexible platform where you can insert up to 4 audio interfaces (analog & digital). Upgradeable as needed by plug & play audio interfaces. Reach your commercial regionalization | regionalized / local advertisement | regionalized / local ad insertion | local ads | local content distribution goals with our flexible regionalization server and receiver concept incl. transport/scheduling system, flexible interface to existing automation systems and the full featured Satellite receivers with regionalization possibility (integrated memory).
DSR01 Easy DVB Satellite Receiver/IRD, DSR01 Lite DVB Satellite Receiver/IRD, DSR01 DVB Satellite Receiver/IRD, DSR02 DVB Satellite Receiver/IRD, FlexSource Distribution Receiver Decoder, MTSR Multi Transport Stream Receiver
FlexSource Distribution Receiver Decoder
The 2wcom FlexSource allows defining the primary input source for different outputs. Users can select freely among the following input sources – Tuner Transport Stream, ASI, IP 1000 Base-T, Audio over IP and audio files uploaded to the internal storage. Even changing the main source from IP to Satellite Transport Stream or to ASI input and using the other for redundancy is possible. Further advantage is that for each main source up to three back-up sources can be defined in case of input failure.
FlexSource Distribution Receiver Decoder
PSM-500L L-Band VSAT/SCPC
The PSM-500L modem is compatible with all M500 Series modems, but with a full L-Band transmit output covering 950 to 1750 MHz and receive input covering 950 to 1900 MHz. Both Tx and Rx functions can be programmed to provide power and 10 MHz reference to the BUC and LNB through the IF cables. Optional external 96 Watt 24 Vdc BUC power supply and a 1 part in 10-8 high stability 10 MHz OCXO reference. The BUC power supply plugs into the rear panel and can be changed for differing BUC requirements.
PSM-500, PSM-500L, PSM-500LT
Early Warning Receiver – First Responder
The FM Early Warning Receiver looks and functions like an ordinary alarm clock radio. The Early Warning Receiver alerts everyone – no matter the current status of the receiver: ON/OFF or in wake-up mode – even during a black-out power failure. The receiver is equipped with two FM radio tuners: One tuner handles the FM radio/alarm-clock, with all normal features. The second tuner receives emergency alert signals only.
Early Warning Receiver First Responder, Early Warning Receiver Public, Early Warning Receiver Wallmount, Early Warning System Server
PSM-500LT L-Band Satellite Terminal for VSAT/SCPC
The PSM-500LT comes standard with an integrated 24Vdc or 48Vdc power supply and a 1 part in 10-8 high stability 10 MHz OCXO reference for low cost BUC and LNB applications. This terminal product is ideal for small remote VSAT stations where performance and reliability is the key to link longevity and quality. This satellite terminal is based on the PSM-500L and is compatible with the M500 Series of modems with a full L-Band transmit output covering 950 to 1750 MHz and receive input covering 950 to 1900 MHz.
PSM-500, PSM-500L, PSM-500LT
PSM-500 IF VSAT/SCPC
This modem can satisfy all of your 70 MHz or 140 MHz IF needs at a low cost. The standard M505 feature set is also the ideal replacement for the popular PSM-4900, but can be software upgraded to meet emerging requirements for years to come. Features such as Reed Solomon and the Overhead Multiplexer with AUPC and Remote Modem Control (RMC) are now available as standard options in this series. Front panel key enabled features make software upgrades to higher data rates and modulation modes easy.
PSM-500, PSM-500L, PSM-500LT
The HUB6501 1IF HUB module is specifically addressing small and dedicated networks. It can support a single satellite network, up-to 250 terminals and up-to 75Mbps of traffic processing, including Quality of Service and congestion management, acceleration, compression and encryption.
HUB6501, HUB6504, HUB6000,EL501, Sat3Play IP Broadband Hub
Next generation DVB-S2 and DVB-S modem specifically designed for broadcast applications. The modem supports the S2 Extensions to achieve barrier-breaking efficiency. As a modulator, it is the best fit for broadcast direct-to-home, primary distribution to head-ends and contribution of television.
MDM2200, MDM3100, MDM6000, MDM6100, AZ410, EL470, EL478, ZN461
1+1 Modulator Redundancy Switch, provides a versatile 1+1 protection scheme for satellite modulators. The AZ210 is easy to operate and switches simultaneously the input data signals and output IF/RF
AZ200, AZ201, AZ202, AZ203, AZ210, AZ210 1+1, AZ212 1+1, AZ270 1+1, AZ290 1+1
Low initial investment per user, thanks to a very low terminal cost and unique Point & Play easy – installation capability Easy to use web GUI for installation, diagnostics and troubleshooting Adaptive Return Link based on different 4CPM modulations/coding and multiple channel bandwidths.
SAT2200 Satellite Terminal, SAT3100 Satellite Terminal