RF Distribution | Lumina Broadcast Systems Australia

Advantech Wireless - RF Frequency ConvertersRF Distribution, Satellite

The HP range of frequency converters is particularly suited for use in VSAT, SCPC Networks, SNG, DVB-RCS and Hub systems were compact redundancy is required. This makes them an ideal choice for large earth stations requiring cost effective solutions for frequency conversion. The lightweight, rugged and compact design also ensures that the HP frequency converter provides the ideal solution for mobile truck or flyaway DSNG systems.

C-Band Block Converters, Outdoor Block Converters (C, Ka, Ku, X-Band), Outdoor Synthesised Converters (S, L-Band)

Saras Technology - Wireless Microphone SystemsRF Distribution

SARAS Technology Limited designs and manufactures a number of RF products for Wireless Microphone applications. The product range includes In Line Amplifiers, Transmitter Boosters, Distribution Amplifiers, Antenna Combining Systems and Splitters/Combiners.

Power Amps, OEM & Custom RF Products, Filters Diplexers & Multiplexers, Wireless Mic Systems

Saras Technology - OEM and Custom RF ProductsRF Distribution

SARAS Technology Limited is involved in the Design and Manufacture of OEM and custom RF Products and Solutions for the Wireless Industry. Our business is focused entirely on delivering custom, unique, cost effective solutions to our varied worldwide clientele. Every product is designed to meet specific customer requirements by highly qualified and experienced engineering teams using state of the art techniques and technologies. Project based teams carry out all the development work in close partnership with our customers.

Power Amps, OEM & Custom RF Products, Filters Diplexers & Multiplexers, Wireless Mic Systems

Saras Technology - High Power RF AmplifiersRF Distribution

SARAS Technology Limited designs and manufactures linear and ultra-linear power amplifiers for commercial, military and other systems that requires high power in a robust and compact package. SARAS’s high power amplifiers are used in many applications including Tactical Communications and Surveillance, Broadcast and Digital Microwave Communication Equipment using higher ordered modulation schemes such as COFDM.

Power Amps, OEM & Custom RF Products, Filters Diplexers & Multiplexers, Wireless Mic Systems

Saras Technology - Filters,Diplexers and MultiplexersRF Distribution

SARAS Technology Limited designs and manufactures a range of RF and Microwave Filters for the Wireless markets. The filters are offered in a variety of performance characteristics including Lowpass, Highpass, Bandpass and Bandstop and are typically used for band-defining applications. In a crowded RF signal environment they are invaluable when used for blocking unwanted interfering signals. Special filters for frequency band splitting (Diplexers etc) are also available.

Power Amps, OEM & Custom RF Products, Filters Diplexers & Multiplexers, Wireless Mic Systems

ETL Systems - Fibre Optical LinkFibre Solutions, RF Distribution

Fibre Optic Link / IFL Model 2800

A compact Fibre Optic Link which can contain 1,2,3, or 4 either TX or RX fibre to L-band converters (or combination of TX and RX) as well as dual redundant power supplies. 1RU housing offers very compact solution for smaller installations. The 2800 series can be fitted with a range of different fibre optic converter modules, depending upon the IFL distance and the application (downlink vs uplink) including a high dynamic range module which is recommended for uplinks as well as stronger downlink signals as it incorporates a superior laser.

Fibre Optic Link / IFL 2800 - L-band Quad Rx, Fibre Optic Link / IFL 2801 - L-band Quad Tx, Fibre Optic Link / IFL 2802 - L-band Triple Rx, Fibre Optic Link / IFL 2803 - L-band Triple Tx, Fibre Optic Link / IFL 2804 - L-band Dual Rx, Fibre Optic Link / IFL 2805- L-band Dual Tx, Fibre Optic Link / IFL 2806 - L-band Single Rx, Fibre Optic Link / IFL 2807 - L-band Dual Tx, Fibre Optic Link / IFL 2808 - L-band Hybrid (Tx/Rx)

ETL Systems - RF DetectionRF Distribution

RF Detection Model 22302-DET10-xxxx

Modular RF Detection System – The modular system chassis holds up to 32 hot-swap RF Detection modules and also benefits from hot-swap dual redundant power supplies and CPU module.

RF Detection Model 22302-DET10-xxxx

ETL Systems - Slope Equalization / CompensationRF Distribution

L-band Equaliser / Slope Compensation Model 26128-AMP101

Single channel variable gain amplifier modules housed in a modular system chassis. Each amplifier module incorporates variable gain amplifiers with gain range of 0 to 28dB and variable slope compensation of 0 to 9dB. The modular system chassis holds up to 16 variable gain amplifier modules and also benefits from hot-swap dual redundant power supplies and CPU module.

L-band Equaliser / Slope Compensation Model 26128-AMP101, L-band Equaliser / Slope Compensation 26128-DIV407, L-band Equaliser / Slope Compensation 26128-DIV807

ETL Systems - Power SuppliesRF Distribution

LNB Power Supply - Fixed Voltage Model 2777

Single channel LNB Power Supply Unit with 18V fixed voltage and 10MHz injection which can be supplied from an internal source or an external 10MHz signal applied via the 10MHz input port on the rear panel. The unit also benefits from dual redundant power supplies.

LNB Power Supply - Fixed Voltage Model 2777/2732/2745/2773/2774, LNB Power Supply - Variable Voltage 2764-xx-E/2764/2782/2778/2771/2776/22361/2772-xx-E

ETL Systems - AmplifiersRF Distribution

L-band Amplifier - Dual Redundant

Dual Redundant Variable Gain L-band Amplifiers comprise of a main and standby amplifier and can feature manual only rotary attenuators (such as model 2544 and 2547), but the introduction of digital variable attenuators has meant that there can be local and remote control of gain levels.

L-Band Amplifier - Fixed Gain Amplifier, L-band Amplifier - Variable Gain Amplifier, L-band Amplifier - n+1 Redundant Amplifier, L-band Amplifier - AGC Amplifier, IF Amplifier - Variable Gain Amplifier, IF Amplifier - n+1 Redundant Amplifier, S-band Amplifier - Variable Gain Amplifier, C-band Amplifier - Variable Gain Amplifier

ETL Systems - CombinerRF Distribution

Dextra Series Splitter/Combiner

The new Dextra series includes 4-way and 8-way splitters and combiners in both single and dual configurations and 16-way splitters and combiners, available as single units. The range offers consistently excellent RF performance, including high linearity and low noise figure, and outperforms some of the more expensive models available.

Active L-band Hybrid units are also available which contain a splitter / divider and a combiner in one 19″” shelf.

L-band Combiner - Active, L-band Combiner - Passive, IF Combiner - Active, C-band Combiner - Active

ETL Systems - Matrix/RoutersRF Distribution

L-band Matrix / L-band Router

ETL has a broad L-band Switch Matrix and L-band Router range for Satellite communications, including the hot-swap NiGMa L-band Matrix which is used for many high resilience high performance applications and smaller more application-specific L-band Routers which are used in cruise ships, broadcast relay stations, and smaller broadcast functions.

L-band Matrix - Distributive (Fan-out) Hot-swap, L-band Matrix - Distributive (Fan-out), L-band Matrix - Combining (Fan-in) Hot-Swap, L-band Matrix - Combining (Fan-in), L-band Matrix - Fan-in & Fan-out, L-band Router

ETL Systems - Distribution AmplifiersRF Distribution

L-band Distribution Amplifiers

The ETL L-band Distribution Amplifier is available in a range of capacities. The most common are 4,8, and 16-ways but larger L-band distribution amplifiers up to 32 or even larger capacities are available. We produce distribution amplifiers (which we call active splitters) and passive splitters. In general the distribution amplifiers are unity gain but some (especially 4-ways) may be made with more gain.

L-band Distribution Amplifier - 2-way Multiple, L-band Distribution Amplifier - Active 4-way, L-band Distribution Amplifier - 4-way Multiple, L-band Distribution Amplifier - Active 8-way,

COM-TECH - Loads and ConnectorsRF Distribution

DH30C

UHF 30 W Plug-in Dry Load

DH30C, DH75C, DH150C, DL150C, DL300C, DL750C, DS1500C, DS3000C

ETL Systems - Splitter / DividersRF Distribution, Test & Measurement

L-band Splitter / L-band Divider - Active

The ETL L-band Splitter or L-band Divider is available in a range of capacities. The most common are 4,8, and 16-ways but larger L-band splitters to 32 or even larger capacities are available. We produce active splitters (also known as L-band Distribution Amplifiers) and passive splitters. In general the active L-band splitters are unity gain but some (especially 4-ways) may be made with more gain. Dual redundant amplifiers and amplifier current monitoring are also available for more mission critical applications.

L-band Splitter / L-band Divider - Active, L-band Splitter / L-band Divider - Passive, IF Splitter / IF Divider - Active, C-band Splitter / C-band Divider - Active, C-band Splitter / C-band Divider - Passive, VHF Splitter / VHF Divider - Active, VHF Splitter / VHF Divider - Passive

COM-TECH - UHF & VHF Band Pass FiltersRF Distribution

CL6X30C/CL7X30C

UHF 100 W 6/7-Pole Bandpass Filter

CL3N30C, CL6X30C, CL7X30C, CL3N50C, CL6X50C, CL&X50C, FC4E80C, FC6D80, FC8D80C, FC4E110C, FC6D110C, FC8D110C, TC4E140C, TC6D140C, TC8D140C, TC4E200C, TC6D200C, TC8D200C

COM-TECH - Coaxial ComponentsRF Distribution

HC40C

UHF 2 kW Hybrid Coupler

HC40C, HC60C, HC80C, HC100C, TH100C, TH150C

ETL Systems - Remote ControllersRF Distribution

Remote Controller - NiGMa Matrix Model NGMXY-01

The ETL NiGMa matrix XY Controller is designed to control the range of ETL NiGMa switch matrix (router) systems. The unit benefits from dual redundant power supplies and provides local control via rotary controls, keypads and display, and remote control via an RJ45 Ethernet port. Each destination and source available on the NiGMa matrix can be enabled or disabled for use by the XY controller via a web browser interface

XY NiGMa Matrix NGMXY-01 - Controller with keypad, rotary controls & display, XY Vulcan Matrix VCNXY-01 - Controller with keypad, rotary controls & display, NiGMa Matrix 21143 - Controller with HMI, Matrix 2171 - L-band 32x32 Switch Matrix Controller with Ethernet

COM-TECH - UHF & VHF Transmitting CombinersRF Distribution

MX3C

UHF 300 W 3-Pole Manifold Combiner

MX3C, MX5C, MF4C, MF6C, SP6X30C, SP7X30C, DB3P30C, DB6X30C, DB7X30C, SP6X50C, SP7X50C, DM3P50C, DM6X50C, DM7X50C, SP6D80C, SP8D80C, DM4E80C, DM6D80C, DM8D80C, SP6D110C, SP8D110C, DM4E110C, DM6D110C, DM8D110C, SP6D140C, SP8D140C, DF4E140C, DF6D140C, DF8D140C, DF4E200C, DF6D200C, DF8D200C

ETL Systems - Carrier MonitoringRF Distribution

Carrier Monitoring

Allows the earth station operator to monitor signals at two levels – via a carrier monitor which monitors an entire series of carriers, and via an L-band channel monitor. The carrier monitoring system can be used up to 26GHz and comprises a spectrum analyser, switch and PC software which monitors selected carriers for consistency of power, carrier / noise and signal. Deviation from set levels triggers alarms and is recorded. The L-band monitor comprises multiple tuners and monitors Bit Error rate, and signal level on up to 16 carriers simultaneously.

Carrier Monitoring