ETL Systems - Carrier MonitoringNetwork Monitoring

ETL allows the earth station operator to monitor signals at two levels – via a carrier monitor which monitors an entire series of carriers, and via an L-band channel monitor. The carrier monitoring system can be used up to 26GHz and comprises a spectrum analyser, switch and PC software which monitors selected carriers for consistency of power, carrier / noise and signal. Deviation from set levels triggers alarms and is recorded. The L-band monitor comprises multiple tuners and monitors Bit Error rate, and signal level on up to 16 carriers simultaneously.

Send Enquiry

Visit Website

ETL Systems - New customisable 64 x 64 Hurricane Matrix / RouterRouters / Switchers

The new 64 x 64 Hurricane Matrix is the smallest matrix of its kind in the market with inclusive LNB powering in a 4U compact, modular chassis. Hurricane’s flexible design offers optimised performance and a range of individual options to suit a particular set of RF needs, such as fibre inputs, variable gain and variable slope.

Send Enquiry

Visit Website

ETL Systems - RF Over Fibre Optic LinkFibre Solutions

ETL’s RF over Fibre products have been designed to be compact and offer excellent value for money. StingRay inter facility links (IFL) transmit and receive L-band and broadband signals over single mode fibre from a satellite antenna to reception equipment up to 10 km away, with options for distances up to 35 km.

Range incl: SRY-C100, SRY-C101, SRY-C102

Send Enquiry

Visit Website

ETL Systems - AmplifiersRF Distribution

L-band Amplifier - Dual Redundant

Dual Redundant Variable Gain L-band Amplifiers comprise of a main and standby amplifier and can feature manual only rotary attenuators (such as model 2544 and 2547), but the introduction of digital variable attenuators has meant that there can be local and remote control of gain levels.

L-Band Amplifier - Fixed Gain Amplifier, L-band Amplifier - Variable Gain Amplifier, L-band Amplifier - n+1 Redundant Amplifier, L-band Amplifier - AGC Amplifier, IF Amplifier - Variable Gain Amplifier, IF Amplifier - n+1 Redundant Amplifier, S-band Amplifier - Variable Gain Amplifier, C-band Amplifier - Variable Gain Amplifier

Send Enquiry

Visit Website

ETL Systems - CombinerRF Distribution

Dextra Series Splitter/Combiner

The new Dextra series includes 4-way and 8-way splitters and combiners in both single and dual configurations and 16-way splitters and combiners, available as single units. The range offers consistently excellent RF performance, including high linearity and low noise figure, and outperforms some of the more expensive models available.

Active L-band Hybrid units are also available which contain a splitter / divider and a combiner in one 19″” shelf.

L-band Combiner - Active, L-band Combiner - Passive, IF Combiner - Active, C-band Combiner - Active

Send Enquiry

Visit Website

ETL Systems - Distribution AmplifiersRF Distribution

L-band Distribution Amplifiers

The ETL L-band Distribution Amplifier is available in a range of capacities. The most common are 4,8, and 16-ways but larger L-band distribution amplifiers up to 32 or even larger capacities are available. We produce distribution amplifiers (which we call active splitters) and passive splitters. In general the distribution amplifiers are unity gain but some (especially 4-ways) may be made with more gain.

L-band Distribution Amplifier - 2-way Multiple, L-band Distribution Amplifier - Active 4-way, L-band Distribution Amplifier - 4-way Multiple, L-band Distribution Amplifier - Active 8-way,

Send Enquiry

Visit Website

ETL Systems - Splitter / DividersRF Distribution, Test & Measurement

L-band Splitter / L-band Divider - Active

The ETL L-band Splitter or L-band Divider is available in a range of capacities. The most common are 4,8, and 16-ways but larger L-band splitters to 32 or even larger capacities are available. We produce active splitters (also known as L-band Distribution Amplifiers) and passive splitters. In general the active L-band splitters are unity gain but some (especially 4-ways) may be made with more gain. Dual redundant amplifiers and amplifier current monitoring are also available for more mission critical applications.

L-band Splitter / L-band Divider - Active, L-band Splitter / L-band Divider - Passive, IF Splitter / IF Divider - Active, C-band Splitter / C-band Divider - Active, C-band Splitter / C-band Divider - Passive, VHF Splitter / VHF Divider - Active, VHF Splitter / VHF Divider - Passive

Send Enquiry

Visit Website

ETL Systems - Matrix/RoutersRF Distribution

L-band Matrix / L-band Router

ETL has a broad L-band Switch Matrix and L-band Router range for Satellite communications, including the hot-swap NiGMa L-band Matrix which is used for many high resilience high performance applications and smaller more application-specific L-band Routers which are used in cruise ships, broadcast relay stations, and smaller broadcast functions.

L-band Matrix - Distributive (Fan-out) Hot-swap, L-band Matrix - Distributive (Fan-out), L-band Matrix - Combining (Fan-in) Hot-Swap, L-band Matrix - Combining (Fan-in), L-band Matrix - Fan-in & Fan-out, L-band Router

Send Enquiry

Visit Website

ETL Systems - Remote ControllersRF Distribution

Remote Controller - NiGMa Matrix Model NGMXY-01

The ETL NiGMa matrix XY Controller is designed to control the range of ETL NiGMa switch matrix (router) systems. The unit benefits from dual redundant power supplies and provides local control via rotary controls, keypads and display, and remote control via an RJ45 Ethernet port. Each destination and source available on the NiGMa matrix can be enabled or disabled for use by the XY controller via a web browser interface

XY NiGMa Matrix NGMXY-01 - Controller with keypad, rotary controls & display, XY Vulcan Matrix VCNXY-01 - Controller with keypad, rotary controls & display, NiGMa Matrix 21143 - Controller with HMI, Matrix 2171 - L-band 32x32 Switch Matrix Controller with Ethernet

Send Enquiry

Visit Website

ETL Systems - Carrier MonitoringRF Distribution

Carrier Monitoring

Allows the earth station operator to monitor signals at two levels – via a carrier monitor which monitors an entire series of carriers, and via an L-band channel monitor. The carrier monitoring system can be used up to 26GHz and comprises a spectrum analyser, switch and PC software which monitors selected carriers for consistency of power, carrier / noise and signal. Deviation from set levels triggers alarms and is recorded. The L-band monitor comprises multiple tuners and monitors Bit Error rate, and signal level on up to 16 carriers simultaneously.

Carrier Monitoring

Send Enquiry

Visit Website

ETL Systems - Fibre Optical LinkFibre Solutions, RF Distribution

Fibre Optic Link / IFL Model 2800

A compact Fibre Optic Link which can contain 1,2,3, or 4 either TX or RX fibre to L-band converters (or combination of TX and RX) as well as dual redundant power supplies. 1RU housing offers very compact solution for smaller installations. The 2800 series can be fitted with a range of different fibre optic converter modules, depending upon the IFL distance and the application (downlink vs uplink) including a high dynamic range module which is recommended for uplinks as well as stronger downlink signals as it incorporates a superior laser.

Fibre Optic Link / IFL 2800 - L-band Quad Rx, Fibre Optic Link / IFL 2801 - L-band Quad Tx, Fibre Optic Link / IFL 2802 - L-band Triple Rx, Fibre Optic Link / IFL 2803 - L-band Triple Tx, Fibre Optic Link / IFL 2804 - L-band Dual Rx, Fibre Optic Link / IFL 2805- L-band Dual Tx, Fibre Optic Link / IFL 2806 - L-band Single Rx, Fibre Optic Link / IFL 2807 - L-band Dual Tx, Fibre Optic Link / IFL 2808 - L-band Hybrid (Tx/Rx)

Send Enquiry

Visit Website

ETL Systems - RF DetectionRF Distribution

RF Detection Model 22302-DET10-xxxx

Modular RF Detection System – The modular system chassis holds up to 32 hot-swap RF Detection modules and also benefits from hot-swap dual redundant power supplies and CPU module.

RF Detection Model 22302-DET10-xxxx

Send Enquiry

Visit Website

ETL Systems - Slope Equalization / CompensationRF Distribution

L-band Equaliser / Slope Compensation Model 26128-AMP101

Single channel variable gain amplifier modules housed in a modular system chassis. Each amplifier module incorporates variable gain amplifiers with gain range of 0 to 28dB and variable slope compensation of 0 to 9dB. The modular system chassis holds up to 16 variable gain amplifier modules and also benefits from hot-swap dual redundant power supplies and CPU module.

L-band Equaliser / Slope Compensation Model 26128-AMP101, L-band Equaliser / Slope Compensation 26128-DIV407, L-band Equaliser / Slope Compensation 26128-DIV807

Send Enquiry

Visit Website

ETL Systems - Power SuppliesRF Distribution

LNB Power Supply - Fixed Voltage Model 2777

Single channel LNB Power Supply Unit with 18V fixed voltage and 10MHz injection which can be supplied from an internal source or an external 10MHz signal applied via the 10MHz input port on the rear panel. The unit also benefits from dual redundant power supplies.

LNB Power Supply - Fixed Voltage Model 2777/2732/2745/2773/2774, LNB Power Supply - Variable Voltage 2764-xx-E/2764/2782/2778/2771/2776/22361/2772-xx-E

Send Enquiry

Visit Website